Plant Growth Chamber, Environmental Test Chamber with Cooling heating & Lighting

Description

Product Specification:
Voltage (V)
220 VAC
Temperature
5 to 50 Degree C
Humidity
55 to 95 %
Insulation
PUF
Compressor
Hermetically Sealed
Product Description:
Plant Growth Chamber
offered find application in research processes and feature optimum lighting support for vascular plants so as to provide for
:-
Standard plant production
Plant pathology experimentation
Seedling germination & development
These plant growth chambers are designed so as to provide for maximum growth area are also suited for genetic studies that comprise -
Arabidopsis
Plant physiology
Early growth studies of seedlings
Features :
Mild steel double walled construction from outside that comes powder coated as well as in puff insulated finish
Perforated adjustable shelves of stainless steel from the inside
System designed to provide for temperature control from 5
o
c to 50
o
c as well as humidity control from 55% to 95%
Digitally controlled finish with desirable illumination control provided through cyclic timer
Made available in sizes of 455 x 410 x 610, 6 cu. ft ; 505 x 415 x 830, 10cu.ft; 570 x 550 x 875, 12 cu. ft ; 650 x 580 x 900mm
Coming with wheels support for optimum mobility support
System designed to work on 220 v ac supply
Full view inner plexi-glass door finish that provides for easy inspections and monitoring of inside chamber specimens without causing any disturbance in process temperature
Comes with support of magnetic door gasket for external door
Coaxial blower support provided for forced air circulation at back
System designed to maintain optimum temperature uniformity as well as homogeneity
The support of PUF insulation also provided for optimum thermal stability as well as brings reduction in electrical energy consumption
Features presence of door operated illumination lamp that comes fitted inside chamber for visibility purposes
Presence of finned tube evaporator that provides for uniform and faster cooling
Safety thermostat provided for preventing overheating
Exterior illumination provided with support of fluorescent lamps tubes that provides for artificial daylight conditions
Technical Specifications :
Temp. 5
o
c to 50
o
c, humidity control from 55% to 95% at cool temperature
Type: Forced Convection Type
Compressor: Hermetically Sealed
Temperature Range: Ambient 5
o
c - 60
o
c ±1
o
c
Humidity: By Steam Process
Humidity Range: 5% above Ambient From 55% To 95% RH+5%RH at Cool Temperatures
MOC Outer: Mild Steel Sheet Powder Coated
MOC Inner: Stainless Steel
Safety: Thermostat
Illumination: Exterior Illumination with Fluorescent Tubes
Controller: Microprocessor Based Temperature-Humidity Controller
Programmable Timer
Illumination: Exterior Illumination With 5 Levels Light Control (0%, 25%, 50%, 75% And 100%)
Size Inner(W x D x H): 455 x 410 x 610mm / 505 x 415 x 830mm / 570 x 550 x 875mm / 650 x 580 x 900mm
Electrical Supply: 220/230V AC, 50/60Hz
Other Specifications
Capacity
280 L
560 L
840 L
1282 L
Volume
10 Cu.ft
20 Cu.ft
30 Cu.ft
45.8 Cu.ft
Inside made of stainless steel sheet. Outside mild steel sheet with Finished in white stoving enamel/powder coated paint with mat Finished color combinations. Fitted with cooling, heating and lighting arrangements. Temperature range 5° C to 50°C± 1°C. Temperature can be obtained from 15°C to 50°C ± 1C when all lights from two sides and top are ‘ON’. Temperature is controlled by DUAL temperature electronic digital temperature controller-cum-indicator to set two temperatures for day and night. Above Growth chamber is completer with humidity control from 55% to 95% RH. Light intensity can be adjusted controller according to requirement and humidity shall be controlled by humidistat. Complete with 0-24 hrs. Timer to work on 220/230 volts 50 cycles A.C. only.
I) Electronics Digital Indicator cum-Humidity controller and temperature Controller.
ii) Microprocessor PID digital temp. Indicator-cum-Controller.
iii) Automatic voltage stabilizer (recommended).
Applications :
Used for research applications like for -
Vascular plants to provide for standard plant production
Plant pathology for exploring and seedling germination and development
These are also suitable for genetic studies involving -
Arabidopsis
Plant physiology
Early growth studies of seedlings
*Note: All the custom duty/taxes to be paid by the buyer.