ESPEC Temperature Humidity Stability Chamber, Thermotron Envirotronics

Description

Espec Model ETH12-CDA
Interior size:  12 cubic feet - approximately 27.5" tall X 27'5" deep X 28" wide
Air Flow:  Top to bottom
Temperature Range:  +150C to -30C
Humidity Range:  20% to 95%  (relative and varies on temperature condition)
Self-contained air-cooled.
208-230 Volts @ 60 amps (will run on 45 amps)
Interior light:   Works.
Refrigeration:   2 hp utilizing R404A
Steam Generator:  4KW.     Will produce 90C @ 90%
Interior:  316 stainless steel
Weight:  2200 lbs
Exterior Dimensions:  56" wide X 50" deep X 91" tall
Temperature Heat up rate:   +23C to 150C = 40 mins
-40C to +150C = 60 mins
Temperature Pull down rate:   +23C to -30C = 60 mins
+150C to -30C = 180 mins
Controller:  Watlow F4 with RS-232 (modbus) communications.
Humidity Sensor:  Viasala HMM100
Please email us your testing requirements to be sure this test chamber will meet your exact needs.
Chamber comes with new Deionizer water cartridge.
Chamber has certificate of calibration dated April 20, 2020
We will run this chamber in our facility with chart results to validate its performance up to 4 continuous days.
On-site inspection is always recommended.  (Tampa International Airport)
We do not warrant this chamber for any specific application, use, method, or function.
Please call for shipping quote.